Asphalt Plants
-
FEATURES AND SPECIFICATIONS
Intended for portability, durability, and reliability, Nomad plants meet the demands of a variety of small, medium and large projects that require quality hot mix asphalt. Nomad plants are designed and built in the U.S.A. with proven results around the globe. You can depend on your Nomad plant to produce high-quality hot mix asphalt for years to come with a minimum of upkeep.
- Available in three sizes, designed for maximum production capacities of 80, 130, or 175 tons per hour (72, 118, or 159 MTPH).
- Nomad plants are offered in various configurations, from the standard plant, with two split bins and a wet scrubber, to the expanded plant with baghouse and a silo.
- Compact design.
- Proven reliability and production capabilities.
-
FEATURES AND SPECIFICATIONS
Runs 30% RAP.
The Voyager 120 offers a compact, highly portable design. Unique for a plant in this class with the ability to run up to 30% RAP. In addition, it is backed by the best service support in the industry.
The ASTEC Voyager 120 is built around a counter flow drum featuring ASTEC v-fights. The v-flights provide greater uniformity of the aggregate veil during the drying process, which results in better heat transfer, a reduction of fuel use and increased productivity.
To enhance portability, a hydraulically driven swing out drag and batcher can be set and ready to go in about 10 minutes. Other features include a reverse pulse baghouse, a controls cab with fully automated PLC controls, gravity take-up with direct drive, air ride suspension and up to five (5) cold feed bins and two (2) RAP bins.
- Compact and highly portable.
- Produces mix with up to 30% RAP content.
- Counter flow drum features ASTEC v-fights.
- V-flights provide greater uniformity of the aggregate veil during drying, which results in better heat transfer, a reduction of fuel use and increased productivity.
- The drag and batcher can be set-up in about 10 minutes.
- Modular design provides added flexibility.
-
FEATURES AND SPECIFICATIONS
The Astec Six Pack HMA facility is the world's best selling portable asphalt facility. The standard setup comes with the Double Barrel® drum mixer, cold feed, scalping screen with inclined conveyor, baghouse, surge bin, drag conveyor and control house. The baghouse load also holds the inertial dust collector. One load handles the SEB and drag conveyor. All ship complete with ductwork, dust screws, electrical switch gear, cables, and plant controls. We also supply RAP bins, fuel tanks, lime mixers and AC tanks.
- A wide range of options.
- Compact, maneuverable plants.
- Self-erecting features for easy moving and setup.
- Choice of 200, 300 and 400 tons per hour.
- Factory installed bags and cages save time and manpower.
- Complete cold feed unit contained on one load.
- Low profile baghouse for easy travel.
- Built-in bulkheads protect machinery.
-
FEATURES AND SPECIFICATIONS
M-Pack – the most advanced relocatable HMA plant on the market today.
When you don't need to move often, but still want to reap the benefits of faster and more economical setup, the ASTEC M-Pack is engineered as a set of modules that are transported by truck and bolted up at the site. Astec tests each component before shipping it to your site to ensure a hassle free setup. Plus, the M-Pack has full-size control rooms, large silos, high production capacity, and excellent maintenance access. Plus, with any Astec product you get unbeatable customer service and support.
- The innovative Astec M-Pack Asphalt Plant sets up much faster and for much less money than other plants.
- High production, large storage capacity and massively constructed components make the modular M-Pack super functional.
- A range of capacities from 200 to 600 tons per hour.
- Backed by ASTEC Service offering around the clock support.
-
FEATURES
Astec stationary plants are suitable for permanent installations, especially when the highest production volumes are required. They allow flexibility for future add-ons as the needs of the contractor change. Stationary plants can accommodate unconventional plant layouts.
Components are supplied with steel legs to grade. Concrete foundations hold the legs and support the components.
Stationary plants are outfitted with Double Barrel® drum mixers and storage silos are used to hold the mix. Like Astec portable and relocatable plants, Astec stationary plants are equipped with many, innovative features not available anywhere else. Astec pollution and noise control equipment include load out tunnels, systems that capture hydrocarbon vapors, stack silencers, and burner blower silencers. This technology makes these permanent facilities good neighbors in their communities.
Astec leads the way with attractive, stationary asphalt plants that offer clean, trouble-free operation.
-
FEATURES
Astec stationary plants are suitable for permanent installations, especially when the highest production volumes are required. They allow flexibility for future add-ons as the needs of the contractor change. Stationary plants can accommodate unconventional plant layouts.
Components are supplied with steel legs to grade. Concrete foundations hold the legs and support the components.
Stationary plants are outfitted with Double Barrel® drum mixers and storage silos are used to hold the mix. Like Astec portable and relocatable plants, Astec stationary plants are equipped with many, innovative features not available anywhere else. Astec pollution and noise control equipment include load out tunnels, systems that capture hydrocarbon vapors, stack silencers, and burner blower silencers. This technology makes these permanent facilities good neighbors in their communities.
Astec leads the way with attractive, stationary asphalt plants that offer clean, trouble-free operation.
-
FEATURES
Astec stationary plants are suitable for permanent installations, especially when the highest production volumes are required. They allow flexibility for future add-ons as the needs of the contractor change. Stationary plants can accommodate unconventional plant layouts.
Components are supplied with steel legs to grade. Concrete foundations hold the legs and support the components.
Stationary plants are outfitted with Double Barrel® drum mixers and storage silos are used to hold the mix. Like Astec portable and relocatable plants, Astec stationary plants are equipped with many, innovative features not available anywhere else. Astec pollution and noise control equipment include load out tunnels, systems that capture hydrocarbon vapors, stack silencers, and burner blower silencers. This technology makes these permanent facilities good neighbors in their communities.
Astec leads the way with attractive, stationary asphalt plants that offer clean, trouble-free operation.
-
FEATURES
Astec stationary plants are suitable for permanent installations, especially when the highest production volumes are required. They allow flexibility for future add-ons as the needs of the contractor change. Stationary plants can accommodate unconventional plant layouts.
Components are supplied with steel legs to grade. Concrete foundations hold the legs and support the components.
Stationary plants are outfitted with Double Barrel® drum mixers and storage silos are used to hold the mix. Like Astec portable and relocatable plants, Astec stationary plants are equipped with many, innovative features not available anywhere else. Astec pollution and noise control equipment include load out tunnels, systems that capture hydrocarbon vapors, stack silencers, and burner blower silencers. This technology makes these permanent facilities good neighbors in their communities.
Astec leads the way with attractive, stationary asphalt plants that offer clean, trouble-free operation.
-
FEATURES
A batch plant with an Astec Coater II can run two HMA production lines, one mixing in batches and the other in continuous runs. The dual-shaft Coater II comes in nine different sizes. Coaters can produce up to 725 tons per hour. These facilities are also outfitted with either a surge bin or a storage silo, a diverter chute for the dryer, weigh bridges for the cold feed bins, and related controls. Existing batch facilities can be retrofitted with the coater as a stand-alone unit.
-
FEATURES AND SPECIFICATIONS
Ground Tire Rubber (GTR) is loaded into the hopper before mixing begins and must be replenished during the mixing process. Next the screw conveyor carries the GTR to the mixing chamber. Then, the GTR is blended with virgin asphalt by a high shear mixer running at a speed of 3400 rpm. As the materials are mixed, they are pumped to the portable holding tank. During the mixing process, fresh materials are continuously fed into the chamber until the required volume of material has been mixed. The CEI Portable Mixing Unit includes the high temperature heating system for the process. Load Cells and Mass Liquid Flow Meters provide extremely accurate material regulation. And the controls can be either panel mounted or included in an air conditioned con-trol room. Low emission options are available for the hot oil heater.
-
FEATURES AND SPECIFICATIONS
Heatec is heavily involved in building new asphalt storage terminals and asphalt emulsion plants. Heatec do major mechanical design and electrical engineering work for these facilities in addition to building much of the equipment. Astec is highly regarded for their prepackaged, factory-built control centers and controls. These products eliminate the headaches associated with brick-and-motar buildings that require field errection, assembly and wiring. And our customers find it much easier to work with a single Heatec/Astec team rather than dealing with a multitude of individual contractors.
Media
Downloads