phoneicon alt= 1300 278 322 

Heaters/Burners

  • thermalfluidheater

    FEATURES

    Heatec specializes in thermal fluid heaters, especially those with helical coils heated by fired burners. They are extremely versatile and used in a wide variety of industries. They are also known as hot oil heaters. Oil and gas producers know them as HMO (Heat Medium Oil) heaters. 

    In any case the burner heats the thermal fluid that circulates through the heater coil and through heating coils in other equipment. A single heater can heat multiple pieces of equipment connected in one or more thermal fluid circuits. Moreover, heating of each piece of equipment can be controlled independently by valves that modulate the flow of the hot oil through the equipment. Heaters with two-pass helical coils are the most popular. They burn a variety of fuels and have high thermal efficiencies that conserve fuel. Heaters are also available with three-pass helical coils and with serpentine coils. Outputs of the ones we can build range up to about 75 million Btu/hour.

  • processheater

    FEATURES

    Heatec process heaters are designed to directly heat a fluid product as it flows through the heater. The product may be liquid or gas. Process heaters heat products directly whereas thermal fluid heaters heat media (thermal fluid) that in turn heats products or other equipment indirectly. Heatec offer a wide variety of process heaters used by a wide variety of producers and manufacturers. Some process heaters are better known by other names: booster heaters, gas regen heaters, reboilers, and water bath heaters.

    Some have helical coils. Some have serpentine coils. Some have fire tubes. Some are vertical. Some are horizontal. Convection heaters are also process heaters and are discussed under the heading: Heaters—Convection. The coils of some process heaters have to be cleared completely after use. These heaters usually have helical heating coils and are in a vertical configuration to facilitate thoroughly draining the coils by gravity.

  • convectionheater

    FEATURES AND SPECIFICATIONS

    Heatec designed these heaters to heat materials that are sensitive to overheating due to high film temperatures. The heater avoids high film temperatures by exposing its heating coils only to heat energy borne in convection gases. Thus, the coils are not exposed to radiant energy produced by its burner flame. Accordingly the film temperature of the materials flowing through its coils will not exceed its bulk temperature more than 5 degrees F. These heaters are used extensively by oil and gas producers. They are also suitable for use by producers of petrochemicals, chemicals, food and by others. Outputs range from 2 to 100 million Btu/Hour.

  • burners

    FEATURES

    Power Flame's versatile line of commercial, industrial burners and Process Burners are suited for a variety of applications. The Power Flame burners present optimum state-of-the-art design for maximum combustion efficiency and operating dependability.

  • astecburners

    FEATURES AND SPECIFICATIONS

    Astec burners offer the latest in reliable burner technology combined with complete one-source responsibility. With retrofit capabilities, Astec is able to offer everything from a simple burner replacement to a complete installed system. Astec's burner group engineers the burners to the specifications of each customer and manufactures each in a new state-of-the-art manufacturing facility. Prior to shipment, each burner is tested on one of Astec’s three tri-fuel (oil, gas & coal) test stands to ensure fast and easy start-up at installation.

    Phoenix® Coal

    The ASTEC Phoenix® Coal burner utilizes an innovative combustion technology to provide a reliable alternative energy source. Thanks to the latest multiple-fuel burning technology, the Phoenix Coal burner provides dependable performance by burning coal as an alternative to oil or natural gas.

    Phoenix® Phantom

    Astec’s premium Ultra-Low NOx Phoenix® Phantom burner leads the pack with the lowest available combustion and noise emissions (gaseous fuels only). The Phantom also achieves the highest electrical energy efficiency with innovations like variable speed drives and offers advanced mixing technology and the latest technological innovations to deliver the absolute minimum gaseous emissions available today.

    Phoenix® Talon

    The Astec Phoenix® Talon II utilizes the latest burner technology to deliver very low emissions combined with energy efficiency. With the optional silencing package, it’s even possible to have a phone conversation on the burner platform while it is firing.

    Phoenix® Fury

    A robust build and simple, accessible construction makes the Phoenix Fury burner a great cost-effective choice. Compared to other open-fired designs, the Fury burner achieves better emissions and fuel-efficiency by putting 50% more combustion air through the burner.

    Whisper Jet®

    The ASTEC Whisper Jet® burner delivers unmatched reliability and hassle-free maintenance. The Whisper Jet® burner cleanly and efficiently burns oil, natural gas, or propane and its compact flame makes it compatible with virtually all drum designs without complicated adjustments.

Media

Downloads

Request a Document

Please let us know your name.
Invalid Input
Please let us know your email address.
Please write a subject for your message.
Invalid Input
Invalid Input
Your apiurl is: https://sma25800.api-us1.com
Your list is: 4 website signups (4)
Invalid Input

About Astec Australia

We are committed to delivering first-class equipment that is fitted with the latest innovative technology.

 

Contact Astec Australia

1300 278 322

enquiries@astecaustralia.com.au

 

 

map