picasion.com cfec07dd94a14e51dc76d09675ca6853  fb  in

SCALEBOSS STRAP

22 March 2016

MINERUNNER TEST READY!

Posted in Aggregate & Mining Group

Get in and Get Dirty and Understnad the Benefits Today

After a successful launch process the first of the Astec Australia Minerunner fleet is ready to get down and dirty and show what its made of. After an initial show and demonstration period the Minerunner will be available for field testing on site. National Product Manager John Williams suggests "This is where contractors and miners will really start to appreciate the value, having lifting more load while burning less fuel and costing nearly nothing to maintain". Williams mentions "we've got one more show Massmin 2016 in Sydney to attend in Early May and then she's put to work". 

For details about how to get the vehicle to your site, contact John Williams at Astec Australia on 1300 278 322 (1300 ASTEC AUS) or email jwilliams@astecaustralia.com.au .

 

 

 

20 November 2015

DATE SET FOR MINERUNNER PRODUCT LAUNCH AND FIELD DAY IN AUSTRALIA

Posted in Aggregate & Mining Group

February 2nd 2016 set for Product Launch

DATE SET FOR MINERUNNER PRODUCT LAUNCH AND FIELD DAY IN AUSTRALIA

After extensive market analysis, the Minerunner All Purpose Vehicle is set to launch in the Australian market. A field day is set down for Tuesday February 2nd 2016 at the Mount Cotton driving centre near Brisbane Queensland. National Product Manager John Williams says “The field day is the perfect opportunity to drive and look under the bonnet of the innovative underground All Purpose light vehicle.”

 

To Register Interest to Attend Click Here!

 

03 July 2015

UNDERGROUND VEHICLE - BTI DEVELOPS PIPE HANDLER FOR LP12 PLATFORM

Posted in Aggregate & Mining Group

Underground Utility Vehicle for use with Pipe Handling & Ventilation Maintenance

UNDERGROUND VEHICLE  - BTI DEVELOPS PIPE HANDLER FOR LP12 PLATFORM

 

 

 

 

 

 

 

 

 

 

 

BTI have know reconfigured their well regarded pipe handling system onto their state of the art LP12 all Hydraulic Wheel Drive (HWD) platform. The LP12 HWD platform gives mine operators the following benefits;

  • Reduced Tyre wear from hydaulic traction control system pushing torque where it is required.
  • Reduced fuel usage (upto 35%) from smaller vent rate through use of HWD.
  • Elimination of service braking costs through the Hydraulic wheel braking.
  • Elimination of driveline, transmission and torque converter meaning machine is easier and less costly to work on.

Apart from the industry leading savings in performance the LP12 platform also comes with the must have cabin features ROPS/FOPS, Air Conditioning and forward facing t-back seating. The pipe handling module provides maximum versatility and comes with the following features:

READ MORE

21 May 2015

MINE RUNNER TO LAUNCH IN AUSTRALIA WITH ADDED FEATURES..

Posted in Aggregate & Mining Group

MINE RUNNER TO LAUNCH IN AUSTRALIA WITH ADDED FEATURES..

The results are in, the BTI Mine Runner all purpose mine vehicle has been roundly endorsed by Australian Mine sites looking for further efficiency and versatility from their light vehicle fleet.

Results from an industry survey and pre-release discussions have widely supported the introduction of the unit sighting its payload capacity (1,818kg), lower maintenance costs, reduced fuel usage, increased life-cycle (5-years +) and operational flexibility as key elements ingredients in its appeal.

16 April 2015

TOP FIVE WAYS TO OPTIMISE CRUSHING CAPACITY

Posted in Aggregate & Mining Group

There are five key ways to optimize your crushing capacity, to give producers the best bang for their buck, as Paul Smith outlines.

Regardless of the type of aggregate equipment you own, the end goal of all producers is the same: To increase the number of tons produced per man-hour. While performance varies depending on the quality of the manufacturer and the experience of the producer, we’ve given you five key ways to optimize your crushing capacity to give you the best bang for your buck.

25 March 2015

TOP WAYS TO IMPROVE WEAR PART LIFE

Posted in Aggregate & Mining Group

Recently, I was asked the best way to prolong the life of wear parts, specifically HSI blow bars, jaw dies, VSI parts and cone liners. Producers often want to know how many hours can be logged or how many tons of material can be produced before having to replace wear parts. The answer is the same every time: It depends on each operation and application.

23 February 2015

ASTEC DELIVERS TECHNICAL TRAINING

Posted in Asphalt & Paving

ASTEC DELIVERS TECHNICAL TRAINING
Building on the success of the 2013 School Series, Astec Australia extended an invitation to its valued asphalt customers to interact and learn from industry experts from the United States in the 2014 Customer School Series.

15 September 2014

ASTEC INNOVATES AGAIN

Posted in Aggregate & Mining Group

FT2500 Vertical Shaft Impactor on Tracks

ASTEC INNOVATES AGAIN

based on the succesful FT4250 Horizontal Shaft Impactor the new KPIJCI Tracked Vertical Shaft Impactor hits the high tide mark with performance and versatility. The working unit is the KPIJCI 2500 EVT a multi-stage VSI crusher capable of crushing in standard, semi-autogenous and fully autogenous settings for maximum wear life. The crushing unit come with Heavy duty taper roller bearing pedestal assembly with lube system. The track carrier is a i-beam frame construction with standard hydraulically driven unit that is easily transported on a standard lowboy. Read More!

 

12 September 2014

KEEP YOUR PAVER MOVING

Posted in Asphalt & Paving

Now Supplying PF-Series Paver Parts for your BK Paver

KEEP YOUR PAVER MOVING

Astec in line with its Astec Response Promise of 24/7 Serviceability, Spare Parts availability and Australia wide Support is please to offer our Mobile Asphalt customers more support through the availability of our PF-Series paver parts. Astec Australia is offering these parts in conjunction with its Astec subsidiary Roadtec, this gives customers confidence that they are getting replacement parts with OEM quality. Read More!

Contact us

Contact Astec Australia Today
1300 278 322 or
1300 ASTEC AUS
Email:enquiries@astecaustralia.com.au

 

Astec Service

Need Astec Service and Support?
1300 278 322 or
1300 ASTEC AUS
Email service@astecaustralia.com.au